Here are the detailed specifications of the Netstar NSW‑RPG071P‑V12 (also referenced as NSW‑RPG071E‑V12) — a Web‑Smart, Indoor Reverse‑PoE (RPoE) Gigabit Switch: �� Ports & Power 7 × 10/100/1000 Mbps RJ‑45 Reverse‑PoE (RPoE PD) — Ethernet-powered (24–48 V DC on pins 4/5 , 7/8–) 1 × 10/100/1000 Mbps RJ‑45 Uplink Port 12 V DC Output via Barrel Jack — powers an ONU/ONT downstream RPoE Input Voltage: 24–48 V DC Max Transmission Distance: 100 m over Cat‑5e/6 �� Network & Management Features Web-based Layer 2 Management: VLAN (802.1Q), QoS (802.1p), Link Aggregation, Traffic Control Plug‑and‑Play functionality Supported Standards: IEEE 802.3/3u/3ab, 802.3x, 802.1Q, 802.1p Flow Control: IEEE 802.3x for full duplex �� Performance & Memory Switching Capacity: 16 Gbps MAC Address Table: 2K dynamic entries Jumbo Frame Support: Up to 9K bytes Power Consumption: < 5 W (excluding DC output load) MTBF: ≥ 50,000 hours �� Mechanical & Environmental Dimensions: 160 × 95 × 28 mm Weight: ~450 g Operating Temperature: –20 °C to 55 °C Humidity Range: 10 %–90 % RH (non‑condensing) ✅ Ideal Use Cases FTTH/FTTB Corridors & Multi‑Dwelling Units — ideal where AC power is not available Indoor CPE Zones — reduces cabling and power hassle Small Office Environments ISP ONU/RPoE Deployments — efficient power/data delivery over Ethernet �� Quick Summary Attribute Specification Ports 7 × Gigabit RPoE PD 1 × Gigabit Uplink PoE Input Reverse PoE 24–48 V DC PoE Output 12 V DC barrel jack Switching Capacity 16 Gbps, 2K MAC, 9K jumbo frames Management Web‑L2: VLAN, QoS, LAG Consumption < 5 W (excl. load) MTBF ≥ 50,000 hrs Temp & Humidity –20 °C to 55 °C, 10–90 % RH Form Factor 160×95×28 mm, 450 g
